Teres Transformer coupled hybrid power amplifier Teres is based on classic tube amplifier topology.
Single ended tube input stage loaded with a phase splitting transformer controlling 2 separate single ended amplifiers out of phase for output.
Tube clarity and tone with might and power.
Unusual but true...
Teres features
  • Audiophile super long life C3g input tube
  • Silicon carbide rectifiers
  • Shunt regulated power supply
  • Solar cell bias of output stage
  • Battery bias of input stage
  • Microprocessor controlled operation
  • NO feedback
  • Special grade screened power transformer
  • JFET/MOSFET cascade output devices
  • The C3g tube handles all the voltage gain needed. It uses a new generation or our choke rectified shunt regulated power supply providing a stable noise free operating point.

    The output stages power JFET cascades form a bridge that when unbalanced by the input signal via the 2 transformer windings restores balance by adjusting their current conduction trough the load. The 2 output stages actually enclose the load in their control loops and try to correct each-other’s errors, reducing the distortion to negligible amounts. Leaving only the "character" of the input stage.
    To reduce the amount of heat generated the amplifier is biased so only the first few watts are in true class A. Music has a crest factor of 10 on average. This means that most of the time we listen with 1/10th of the peak levels. For most users, this translates to under 5W. Peaks can reach over 100watts during playback, but only for few milliseconds. For those peaks the amplifier switches to class B using only one leg of the output stage capable to deliver up to 250W/8ohm and 350w/4ohm.
    Not sharing a common reference point apart from the load, itself makes the second leg correct for any error produced by the first one. The result is an amplifier capable of extreme power while delivering exquisite smoothness and low level resolution.
    The driver stage is isolated by the interstage transformer and is not influenced in any way by the output stage maintaining tone color and resolution at all powers levels and loads.

    Having the output stages floating around the load prompted for the use of a unique biasing technique powered by solar cells. This was the quietest galvanic isolated power we could come up with. Using opto-electrical conversion we control the bias by adjusting light intensity in the control circuit.

    Teres is an example of modern technology solving age-old problems allowing us to go a step beyond.

    The physical appearance of Teres is typical Thrax understated elegance. Exquisite finishing ads to the presentation of a solid block of metal like a bigger brother of Heros.

    Enjoy.
    TECHNICAL SPECIFICATIONS Inputs 1 unbalanced RCA connector 1 balanced XLR connector Outputs 250W in 8Ω 350W in 4Ω Power supply 115 or 230 V Power consumption Max.700W Dimensions 340W x 400D x 230H mm Weight 35Kg
    AVAILABLE FINISHES Silver Anodized Aluminum Black Anodized Aluminum
    DOWNLOADS Operating Manual Thrax Brochure
    2405 NE Cross Creek Ln | Lee’s Summit, MO 64086 | USA | Telephone: +1 816-875-6519 | E-mail: Info@audio-union.com